Safety Steps
Product Request Form
Product Request Form
About the Product
À propos du produit
3 LT
10 LT
20 LT
3 LT
10 LT
20 LT
Save on WSIB , insurance, and lawyers.
Provide immediate anti-slip safety with almost indestructible Anti-Slip FRP Fiberglass Step Covers & Walkway Panels, Anti-Slip FRP Stair Treads & Walkway Ramp Panels.
Our Anti-Slip FRP Step Covers and Walkway Panels are heavy duty solutions that are suitable for interior and exterior stairs, walkways and ramps made of concrete, wood, stone, metal or brick. Rapidly remedy slippery areas with minimal downtime.
Unlike Anti-Slip Coatings or Anti-Slip Tapes, Our FRP Step Covers, Treads and Panels can be installed in winter and are ideal for application in very cold or wet areas where the application of a coating may be impractical or a quick fix for slippery surfaces that can’t be easily resurfaced.
Our Anti-Skid FRP Step Covers, Treads, Walkway and Ramp panels are a quick and simple solution for greasy, slippery stairs which cannot be painted or coated due to weather, lack of downtime or are chemically damaged. Anti-Slip FRP Step Covers and Treads have a heavy-duty resin bonded anti-slip surface that matches our FRP Panels and Walkways.
FRP Step Covers are lightweight, versatile, easy to install, available black, yellow or black with yellow nosing for easy identification. Our FRP Treads are constructed with our proprietary blend of mineral abrasives applied over thermoset polyester fiber reinforced polymer panels and provide a more permanent solution than anti–slip tapes. Custom sizes available.
MIXING
ROCK LOCK BINDER resin for 3-4 mins.
POUR ON
SCREED GRAVEL
APPLY
COMPLETE
TEST REPORT
(Technical data depends on the grit/gravel used)
System: 2-component epoxy resin system (2:1 ratio, 2 parts resin for every 1 part hardener)
Compressive Strength:11.4kg/mm2
Bending Tensile Strength:25kg/mm2
Application Time: 20-30 minutes
Application Temperature: Best suited for 20°C (68°F). At lower temperatures, curing slows; at higher temperatures, curing speeds up.
Re-opening of Surfaces
Allows pedestrian traffic after 24 hours. Cure for 6 days for vehicular traffic (driveways or parking lots).
Water Permeability: Very high permeability; water drainage rate depends on the depth of the bottom base and top layer grain/gravel size.
Storage Life: 24 months
Storage Area: Frost-free, dry conditions.
Coverage Estimates
Decorative areas
1/2 inch of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 100 sqft
Pedestrian Foot Traffic
1.5 inches thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 50 sqft.
Driveway Traffic
Minimum 2 inches of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 25 sqft.
Large Parking Lot Traffic
Minimum 4 inches of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 12.5 sqft.
3 LT
10 LT
20 LT
MIXING
ROCK LOCK BINDER resin for 3-4 mins.
POUR ON
SCREED GRAVEL
APPLY
COMPLETE
TEST REPORT
(Technical data depends on the grit/gravel used)
System: 2-component epoxy resin system (2:1 ratio, 2 parts resin for every 1 part hardener)
Compressive Strength:11.4kg/mm2
Bending Tensile Strength:25kg/mm2
Application Time: 20-30 minutes
Application Temperature: Best suited for 20°C (68°F). At lower temperatures, curing slows; at higher temperatures, curing speeds up.
Re-opening of Surfaces
Allows pedestrian traffic after 24 hours. Cure for 6 days for vehicular traffic (driveways or parking lots).
Water Permeability: Very high permeability; water drainage rate depends on the depth of the bottom base and top layer grain/gravel size.
Storage Life: 24 months
Storage Area: Frost-free, dry conditions.
Coverage Estimates
Decorative areas
1/2 inch of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 100 sqft
Pedestrian Foot Traffic
1.5 inches thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 50 sqft.
Driveway Traffic
Minimum 2 inches of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 25 sqft.
Large Parking Lot Traffic
Minimum 4 inches of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 12.5 sqft.
3 LT
10 LT
20 LT
Gallery
Our service works look like this
Other Products
Rock Lock Binder – The Ultimate Gravel Binding Solution
#1 for Permeable Gravel Binding Solutions for any and all applications.
Classeur à verrouillage Rock Safety Glow
Le numéro 1 des solutions de liant pour gravier perméable pour toutes les applications.
Glow Safety Signs
Our Glow Safety Signs come in a variety of styles from aluminum to sticker adhesive, illuminate dark paths, recharge by light source, natural or artificial
Glow Safety Epoxy
Our Glow Safety Epoxy are suitable for slippery when wet ceramic, porcelain tile, mosaic, granite, Saltillo, glazed brick, unsealed concrete.
Glow Safety Slip Resistant Floor Coating and Aerosol Spray
Anti slip traction integrated into the coating, available for indoor / outdoor use easy to apply to concrete, metal, wood surfaces.
Glow Safety Products
Glow Safety Permeable Paving Systems offer a great new look to any recreational area in and around any property, providing a modern feel to paved areas while maintaining a classic brick paver look. Night time around the pool, deck, or outdoor walkway has never looked better, or been safer after dark.
Safety Signs
Safety Signs promote a safe work environment, keeping employees aware of potential hazards and reinforcing important safety precautions and policies.
Safety Grits Tapes
Our Safety anti slip exceeds the standards for slip resistance in accordance with ASTM requirements
Are you interested in a similar Product? Contact us via this form.
What They Say About Us...
