Glow Safety Epoxy
Product Request Form
Product Request Form
About the Product
À propos du produit
3 LT
10 LT
20 LT
3 LT
10 LT
20 LT
Save on WSIB , insurance, and lawyers.
Glow Safety Epoxy is a glow-in-the-dark epoxy made with high-grade photo luminescent ingredients to maximize glow brightness and duration. The formula absorbs light as energy and releases this energy when placed in the dark. This charge cycle can be performed repeatedly and with any light source. Glow Safety Epoxy is formulated to glow-in-the-dark for hours and contains no fillers or impurities to interfere with the glow. Durable, chemical, water & abrasion resistant, it can be used indoors on virtually any surface.
Glow Safety Epoxy glow-in-the-dark epoxy coating is a custom-made formula using only the highest grade of photoluminescent ingredients designed for maximum brightness. The combination of high-grade ingredients, high ratio, and EcoPoxy resin system results in an intense glow with extended glow-in-the-dark duration. It contains no fillers or impurities which can interfere with the glow.
MIXING
ROCK LOCK BINDER resin for 3-4 mins.
POUR ON
SCREED GRAVEL
APPLY
COMPLETE
TEST REPORT
(Technical data depends on the grit/gravel used)
System: 2-component epoxy resin system (2:1 ratio, 2 parts resin for every 1 part hardener)
Compressive Strength:11.4kg/mm2
Bending Tensile Strength:25kg/mm2
Application Time: 20-30 minutes
Application Temperature: Best suited for 20°C (68°F). At lower temperatures, curing slows; at higher temperatures, curing speeds up.
Re-opening of Surfaces
Allows pedestrian traffic after 24 hours. Cure for 6 days for vehicular traffic (driveways or parking lots).
Water Permeability: Very high permeability; water drainage rate depends on the depth of the bottom base and top layer grain/gravel size.
Storage Life: 24 months
Storage Area: Frost-free, dry conditions.
Coverage Estimates
Decorative areas
1/2 inch of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 100 sqft
Pedestrian Foot Traffic
1.5 inches thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 50 sqft.
Driveway Traffic
Minimum 2 inches of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 25 sqft.
Large Parking Lot Traffic
Minimum 4 inches of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 12.5 sqft.
3 LT
10 LT
20 LT
MIXING
ROCK LOCK BINDER resin for 3-4 mins.
POUR ON
SCREED GRAVEL
APPLY
COMPLETE
TEST REPORT
(Technical data depends on the grit/gravel used)
System: 2-component epoxy resin system (2:1 ratio, 2 parts resin for every 1 part hardener)
Compressive Strength:11.4kg/mm2
Bending Tensile Strength:25kg/mm2
Application Time: 20-30 minutes
Application Temperature: Best suited for 20°C (68°F). At lower temperatures, curing slows; at higher temperatures, curing speeds up.
Re-opening of Surfaces
Allows pedestrian traffic after 24 hours. Cure for 6 days for vehicular traffic (driveways or parking lots).
Water Permeability: Very high permeability; water drainage rate depends on the depth of the bottom base and top layer grain/gravel size.
Storage Life: 24 months
Storage Area: Frost-free, dry conditions.
Coverage Estimates
Decorative areas
1/2 inch of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 100 sqft
Pedestrian Foot Traffic
1.5 inches thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 50 sqft.
Driveway Traffic
Minimum 2 inches of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 25 sqft.
Large Parking Lot Traffic
Minimum 4 inches of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 12.5 sqft.
3 LT
10 LT
20 LT
Gallery
Our service works look like this
Other Products
Rock Lock Binder – The Ultimate Gravel Binding Solution
#1 for Permeable Gravel Binding Solutions for any and all applications.
Classeur à verrouillage Rock Safety Glow
Le numéro 1 des solutions de liant pour gravier perméable pour toutes les applications.
Glow Safety Signs
Our Glow Safety Signs come in a variety of styles from aluminum to sticker adhesive, illuminate dark paths, recharge by light source, natural or artificial
Glow Safety Slip Resistant Floor Coating and Aerosol Spray
Anti slip traction integrated into the coating, available for indoor / outdoor use easy to apply to concrete, metal, wood surfaces.
Glow Safety Products
Glow Safety Permeable Paving Systems offer a great new look to any recreational area in and around any property, providing a modern feel to paved areas while maintaining a classic brick paver look. Night time around the pool, deck, or outdoor walkway has never looked better, or been safer after dark.
Safety Signs
Safety Signs promote a safe work environment, keeping employees aware of potential hazards and reinforcing important safety precautions and policies.
Safety Grits Tapes
Our Safety anti slip exceeds the standards for slip resistance in accordance with ASTM requirements
Are you interested in a similar Product? Contact us via this form.
What They Say About Us...
