Glow Safety Slip Resistant Floor Coating and Aerosol Spray
Product Request Form
Product Request Form
About the Product
À propos du produit
3 LT
10 LT
20 LT
3 LT
10 LT
20 LT
Save on WSIB , insurance, and lawyers.
Anti Slip Floor Coating by Glow Safety – A full range of water based and solvent based pedestrian grade, light and medium vehicular grade anti slip floor coating and anti-slip aerosol sprays with non-skid traction grit. For interior and exterior use on wood, concrete or steel surfaces that require safe footing. Resistant to weathering, abrasion and many chemicals.
Several one-part anti-skid coatings Ideal for use on walkways, steps, ramps, locker room floors, boat decks, and a variety of other interior and exterior concrete, wood and metal surfaces that have been properly prepared. Many of our anti-skid coatings are supplied with our slip-resistant additive already integrated into product for ease of application. In addition tough, heavy-duty, two-part anti-slip coatings for a variety of interior and exterior applications
In industrial and commercial environments including walkways, steps, ramps, factory floors, warehouse floors including pallet truck and tow-motor traffic. Chemical and abrasion resistant, hard wearing, resistant to aviation fuel, gasoline and aviation hydraulic fluid. Anti-Slip aerosols are supplied in acrylic and epoxy resin and adhere to fiberglass, wood, steel, concrete, and suitable for steps, ramps, boat decks, diving boards, skateboards, surfboards and other surfaces where increased traction is needed.
Glow Safety Slip Resistant Floor Coating and Aerosol Spray comes in multiple colours and glow in the dark
MIXING
ROCK LOCK BINDER resin for 3-4 mins.
POUR ON
SCREED GRAVEL
APPLY
COMPLETE
TEST REPORT
(Technical data depends on the grit/gravel used)
System: 2-component epoxy resin system (2:1 ratio, 2 parts resin for every 1 part hardener)
Compressive Strength:11.4kg/mm2
Bending Tensile Strength:25kg/mm2
Application Time: 20-30 minutes
Application Temperature: Best suited for 20°C (68°F). At lower temperatures, curing slows; at higher temperatures, curing speeds up.
Re-opening of Surfaces
Allows pedestrian traffic after 24 hours. Cure for 6 days for vehicular traffic (driveways or parking lots).
Water Permeability: Very high permeability; water drainage rate depends on the depth of the bottom base and top layer grain/gravel size.
Storage Life: 24 months
Storage Area: Frost-free, dry conditions.
Coverage Estimates
Decorative areas
1/2 inch of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 100 sqft
Pedestrian Foot Traffic
1.5 inches thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 50 sqft.
Driveway Traffic
Minimum 2 inches of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 25 sqft.
Large Parking Lot Traffic
Minimum 4 inches of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 12.5 sqft.
3 LT
10 LT
20 LT
MIXING
ROCK LOCK BINDER resin for 3-4 mins.
POUR ON
SCREED GRAVEL
APPLY
COMPLETE
TEST REPORT
(Technical data depends on the grit/gravel used)
System: 2-component epoxy resin system (2:1 ratio, 2 parts resin for every 1 part hardener)
Compressive Strength:11.4kg/mm2
Bending Tensile Strength:25kg/mm2
Application Time: 20-30 minutes
Application Temperature: Best suited for 20°C (68°F). At lower temperatures, curing slows; at higher temperatures, curing speeds up.
Re-opening of Surfaces
Allows pedestrian traffic after 24 hours. Cure for 6 days for vehicular traffic (driveways or parking lots).
Water Permeability: Very high permeability; water drainage rate depends on the depth of the bottom base and top layer grain/gravel size.
Storage Life: 24 months
Storage Area: Frost-free, dry conditions.
Coverage Estimates
Decorative areas
1/2 inch of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 100 sqft
Pedestrian Foot Traffic
1.5 inches thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 50 sqft.
Driveway Traffic
Minimum 2 inches of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 25 sqft.
Large Parking Lot Traffic
Minimum 4 inches of thickness for 250 lbs of aggregate mixed with 3 liters of resin/hardener mix covers 12.5 sqft.
3 LT
10 LT
20 LT
Gallery
Our service works look like this
Other Products
Rock Lock Binder – The Ultimate Gravel Binding Solution
#1 for Permeable Gravel Binding Solutions for any and all applications.
Classeur à verrouillage Rock Safety Glow
Le numéro 1 des solutions de liant pour gravier perméable pour toutes les applications.
Glow Safety Signs
Our Glow Safety Signs come in a variety of styles from aluminum to sticker adhesive, illuminate dark paths, recharge by light source, natural or artificial
Glow Safety Epoxy
Our Glow Safety Epoxy are suitable for slippery when wet ceramic, porcelain tile, mosaic, granite, Saltillo, glazed brick, unsealed concrete.
Glow Safety Products
Glow Safety Permeable Paving Systems offer a great new look to any recreational area in and around any property, providing a modern feel to paved areas while maintaining a classic brick paver look. Night time around the pool, deck, or outdoor walkway has never looked better, or been safer after dark.
Safety Signs
Safety Signs promote a safe work environment, keeping employees aware of potential hazards and reinforcing important safety precautions and policies.
Safety Grits Tapes
Our Safety anti slip exceeds the standards for slip resistance in accordance with ASTM requirements
Are you interested in a similar Product? Contact us via this form.
What They Say About Us...
